- Fast & Direct
- Product Portal
Device for continuous operation for low to medium amounts of smoke.
With the high-vacuum welding fume filters in the SRF SK series simultaneous extraction is possible at several points via a connected pipe system. The strong vacuum guarantees optimal suction even over longer distances. With a side channel compressor as a suction unit, the devices can also be used in continuous operation. SRF SK models are available in four performance levels.
Mobile dust extractors can be installed for single-location or central extraction in production halls.
Fast, effective filter cleaning with a hand-held compressed air pistol blows the filter lamellas clean inside and out. Smoke particles come loose from the filter material and fall into the filter housing's dust collection channel.
In automatic cleaning, the filter is cleared after the fan stops. On devices with an IFA test certificate, an acoustic signal indicates the need for filter cleaning.
Pulse-jet cleaning clears the filter cartridges from the inside out (clean gas side). This loosens dust stuck to the exterior of the cartridges, and it falls into the collection container. The filter cartridges are automatically cleanes individually. Pulse-jet cleaning allows filter cleaning during suction operation with no need to shut off the extractor.
We would be delighted to discuss your needs in a personal consultation.
|Max. negative pressure||Pa||21.100||24.500||25.000||22.000|
|Dimensions (L/W/H)||mm||1.320 x 530 x 1.190||1.680 x 780 x 1.300||1.680 x 780 x 1.300||1.680 x 780 x 1.300|
|Manual filter cleaning (compressed air)||55.146||55.161||55.147||55.148|
|Pneumatic filter cleaning||55.149||55.162||55.150||55.151|
|Pulse jet filter cleaning||-||55.163||55.152||55.153|